90413 tkim/52098ha (kt)/62096gi (koto)/92294mo 8-7589/4218ta, ts 8-2176 no. 2772-1/3 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 DBB08 0.8a single-phase bridge recti er features ? plastic molded structure and ultrasmall package making it easy to make DBB08-applied sets smaller. ? glass passivation for high reliability. speci cations absolute maximum ratings at ta=25c parameter symbol conditions DBB08g unit peak reverse voltage v rm 600 v average reciti edd current i o alumina board 0.8 a pcb 0.5 a surge forward current i fsm 50hz sine wave, 1cycle 30 a junction temperature tj 150 c storage temperature tstg --40 to +150 c electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max forward voltage v f i f =0.4a 1.05 v reverse current i r v r :at each v rm 10 a thermal resistance rth(j-a) mounted on cu foil (1mm 1mm) on alumina boad 76 c / w mounted on pcb 134 c / w ordering number : en2772c stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. ordering information see detailed ordering and shipping information on page 3 of this data sheet.
DBB08 no. a2772-2/3
DBB08 no. a2772-3/3 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner. package dimensions DBB08g-tm-e ordering & package information electrical connection device package shipping memo DBB08g-tm-e dip4 750 pcs./reel pb-free -- +
|
